Customized High-Frequency Circuit Measurement System
Name
Customized High-Frequency Circuit Measurement System
Number
HF-006
Location
Hsinchu
Class
High-Frequency Measurement
Access Level
B2
Contact
Mr. Shen 03-5773693 #7630
E-mail
Booking Method
Self-booking Assisted Booking User Self-service
Last Update
2025.01.09
Introduction
HF-006 Customized High-Frequency Circuit Measurement System supports for RFIC (LNA/VGA/PA, mixer, switch, VCO/PLL, phase shifter, filter, etc.) measurement of S-parameter, linearity/non-linearity test, noise figure, phase noise, etc. Users may measure circuits by themselves at below 67GHz. Engineers are needed at over 67GHz.
Service
- Frequency Range: DC~220GHz
- DUT: Amplifier, Mixer, Filter, Switch, MOSFET, Inductor, Capacitor, etc.
- Measurement: S-parameter, RF Power, Spectrum, P1dB, IIP3, Conversion-Gain, Isolation, Noise Figure.
Equipment
Network Analyzer:
Keysight (Agilent) E5061B ENA Series Network Analyzer:5 Hz ~ 3 GHz
Keysight N5247B PNA X Network Analyzer:10 MHz ~ 67 GHz
Signal Generator:
Keysight (Agilent) N5182B MXG X-Series RF Vector Signal Generator:9 kHz ~ 6 GHz
Keysight (Agilent) E8254A PSG-Series Signal Generator:250 KHz ~ 40 GHz
Keysight (Agilent) E8257D PSG-Analog Signal Generator:250 KHz ~ 67 GHz
Keysight (Agilent) E8267D PSG Vector Signal Generator:250 KHz ~ 44 GHz
Keysight M9384B VXG Microwave Signal Generator:1 MHz ~ 44 GHz
Signal Analyzer:
Keysight (Agilent) E4440A PSA-Series Spectrum Analyzer:3 Hz ~ 26.5 GHz
Keysight (Agilent) E4448A PSA-Series Spectrum Analyzer:3 Hz ~ 50 GHz
Keysight (Agilent) E5052B Signal Source Analyzer:10 MHz ~ 7GHz
Keysight (Agilent) E5053A Microwave Downconverter:3 GHz~26.5 GHz
Keysight (Agilent) N9010A EXA Signal Analyzer:10 Hz~ 32 GHz
Keysight N9020B MXA Signal Analyzer:10 Hz~26.5 GHz
Keysight N9041B UXA Signal Analyzer:2 Hz~110 GHz
Keysight N9042B UXA Signal Analyzer:2 Hz~50 GHz
Oscilloscope:
Keysight (Agilent) 54615B Oscilloscope:500 MHz / 1GSa/s
Keysight (Agilent) DSO-X 3034A Digital Storage Oscilloscope:350 MHz / 4 GSa/s
Keysight (Agilent) DSO-80804A Infinium Oscilloscope:12 GHz / 40 GSa/s
Keysight MXR254A Infiniium MXR-Series Oscilloscope:2.5 GHz
DC Supply:
Keithley 236 Source Measure Unit:0 ~ 110V, 100mA
Keithley 2230G-30-1,3-Channel Programmable Power Supplies:0~30V, 0~1.5 A/0~6 V, 0~5 A
Keithley 2230-30-3,3-Channel Programmable Power Supplies:0~30V, 0~3 A
Keysight (Agilent) 6625A System DC Power Supply:2-OUTPUTS, 0~16V, 0~2 A/0~50 V, 0~1 A
Keysight (Agilent) 6629A System DC Power Supply:4-OUTPUTS, 0~16V, 0~2 A/0~50 V, 0~1 A
Keysight N6701A Low-Profile Modular Power System Main frame. 600 W:4-OUTPUT, 0~50 V, 0~1.5 A
(Using N6761A Precision DC Power Module, 50V, 1.5A, 50W)
Keysight N6701C Low-Profile Modular Power System Main frame. 600W:4-OUTPUT, 0~50 V, 0~3 A
(Using N6762A Precision DC Power Module, 50V, 3A, 100W)
Keysight N8737A 3300Watt System DC Power Supply : 0 ~60V, 0~55A
Software
- Formfactor WinCal RF Calibration Tool
- TSRI in-house measurement software
Supplementary Information
Price ListQ&A
Notice
- 無故未到仍將依本中心計費標準收費,如申請人因天災因素導致無法至本中心量測,為確保客戶安全,實驗室會將量測日調整至可量測最近日期,如有問題請來電詢問。
- 量測服務不提供指定機種服務,實際量測所使用儀器會根據工程師判斷而定。
- 僅提供67 GHz以下變溫服務→ Probe Station:6" vary temperature by manual ( room temperature ~ 200℃)
Instrument Reservation Procedure
Users can initiate the reservation process by visiting the TSRI homepage.Navigate to 'Measurement Services' and select the desired reservation item.
Log in to the reservation system to proceed with the reservation.
- 【Self-booking】Please make a reservation on the available pages.
- 【Assisted Booking】After applying and receiving approval from TSRI engineers, the Booking System will send notifications containing the data and time of appointments.
- Users are required to arrive at the laboratory on time. Absent users will be charged a minimum of one unit of time usage fee.
- Upon the completion of measurement appointments, users will receive completion notifications via email. If no objections are raised within the specified timeframe, please complete payment by the expiry date. If emails are not received, please contact TSRI customer service.
- All instruments or accessories must be returned to their original locations to keep the order and convenience for the next users.
- In the event of any damaged, missing, dysfunctional, or non-operational instruments or accessories, please promptly notify the engineers.
- Users are not permitted to use laboratory computers or remotely access their personal computers. If computer access is necessary, please contact the laboratory assistant or engineers.
- The laboratory operates during the hours of 9:00 AM to 12:00 PM and 1:00 PM to 5:00 PM. During the lunch break, the laboratory is closed, and the users are advised to wait in the hallway.
- Food and beverages are strictly prohibited within the laboratory.
- TSRI reserves all the rights to approve the usage of all laboratory equipment and resources.